WireXpert MP C8

The High End Copper Certifier up to 3,000 MHz

Article Number : 230000

The flagship of the WireXpert MP series for copper testing up to Cat 8 and up to 3000 MHz
Support for all common connector systems as well as Cat 8.2 connectivity
Fast test times enabling users to complete jobs in minimum time
Fast pre Wiremap to pinpoint wiremap issues even before an Autotest was started by the user
Only device in it´s class with exchangeable and affordable measurement cords with exchangeable measurement tips

Copper cable certification up to Cat 8 and beyond

The C8 comes with all features of the C6A, but with a frequency range up to 3000MHz, making this product a future prove investment protection for use in office and datacenter environments. The C8 is capable of certifying Cat 8 links for 25 and 40Gbit/s Ethernet and more.

The WireXpert MP range is packed with features that help saving time on the job. It is important to not only save a couple seconds per Autotest, but saving minutes completing all necessary steps for every link tested. If links fail, WireXpert MP translates complex RF measurements into easy-to-understand test results, helping users to pinpoint and repair issues. The devices are ergonomically optimized with 2 Autotest buttons for left- and right-handed use. Flip Tags allow the user to change the identity of the device of being either a local or remote unit making the device more flexible for various applications.

Advantages

Areas of application	Premise cable testing Office cable testing Industrial cable testing Special cable testing, e.g. trains, ships, wind mills Patchcord testing Wire harness testing
Special characteristics	Measurements up to Cat 8 and beyond up to 3000MHz Only certifier that displays graphics in landscape format Long battery life Pre wiremap Large display Flexible modular platform Replaceable LongLife measuring cables (more cost-effective)
Your benefit	Investment protection due to the wide frequency range from 0.1-3000MHz making the device a companion for many years Barcode scanner function for quick assignment of the cable ID Camera for documentation & QR code scanning Measurement screens in landscape and portrait format Podular platform that can be expanded when needed Economical device for all common copper measurements incl. SPE Easy handling due ergonomic housing and light weight Sensitive touch screen Dual Control System PLUS TM for fast workflow

Product details

Delivery

Scope of delivery:

2x Mainframe kits
2x Copper test module units
2x Cat 8 channel test adapters
2x Cat 8 permanent link test adapters
2x Cat 8 long life cords
2x Charging adapters
2x Headsets (wired)
1x Quick Start Guide
1 Set calibration and conformity certificates
1x DCRU calibration artifact
1x Tri-Mode Softcase

Specifications

COPPER TESTING

Accuracies: Exceeds: IEC 61935-1 Level IIIe, IV, V, VI; IEC 61935-1-1; IEC 61935-1-2; TIA 1152A Level IIIe, 2G; TIA-5071; draft ISO/IEC 61935-4

Certification testing: TIA 568.2-E CAT 5e, 6, 6A, CAT 8, TIA 1005A, TIA 568.5, TIA 568.7; ISO/IEC 11801 series and EN 50173 Class D, E, EA, F, FA, Class I and Class II; TIA and ISO testing modes: Permanent link, channel, MPTL, E2E; Patchcord testing CAT 5e, 6, 6A, 7, 7A, 8

Max. cable length for dual-ended Autotest: Measurement range: 0 - 2000 m, display resolution: 0.1 m

Insertion cycles: Channel:Channel: 10000 typical, Permanent link: 5000 typical

TEST PARAMETERS

Wiremap:TIA 568A and 568B, crossover variants, Profinet

Loop Resistance:Measurement range: 0 - 200 Ohm, display resolution: 0.1 Ohm

Length: Measurement range: 0 - 2000 m, display resolution: 0.1 m

Propagation Delay and Delay Skew: Measurement range 1 ns – 10 μsec, display resolution: 1 ns

RF Parameter Display Resolution: 0.1 dB

Advanced diagnostics: Time-domain fault Locator for RL and NEXT

Full specifications see datasheet

Documents