Tier 1 Fiber Certification for both Multimode and Singlemode Cabling in one Set

All-in-one fiber only encircled flux compliant tier 1 certifier for both multimode (850/1300 nm) and singlemode (1310/1550 nm) fiberoptic cabling. For multimode, EF compliance out of the box ensures measurement accuracies to highest industry standards. The included broadband power meter ranges from from 800 to 1650 nm.

The WireXpert MP range is packed with features that help saving time on the job. It is important to not only save a couple seconds per Autotest, but saving minutes completing all necessary steps for every link tested. If links fail, WireXpert MP translates complex RF measurements into easy-to-understand test results, helping users to pinpoint and repair issues. The devices are ergonomically optimized with 2 Autotest buttons for left- and right-handed use. Flip Tags allow the user to change the identity of the device of being either a local or remote unit making the device more flexible for various applications. 

Advantages

Areas of application
  • Premise cable testing
  • Office cable testing
  • Industrial cable testing
  • Special cable testing, e.g. trains, ships, wind mills
  • Fiber harness testing
  • Datacenter cable testing
Special characteristics
  • WireXpert MP mainframe with quad modules containing both multimode 850/1300 nm and singlemode 1310/1550 nm fiber light sources
  • Broadband power meter from 800 to 1650 nm
  • Encircled Flux compliant 850 nm multimode light source to IEC 14763-3 removes the need for expensive mode conditioning measurement cords
  • Exchangeable adaptors for most common connector interfaces included. (LC, SC)
  • Two integrated red light sources with 1.25 and 2.5 mm ferrules remove the need to use an adaptor for 1.25 ferrules
  • Guided user experience for fiber testing 
Your benefit
  • Cost effective fiber only tier 1 certifier for multimode and singlemode fiberoptic cabling
  • Reliable measurement accuracy with EF compliance to the highest industry standards
  • Flexible connection options with interchangeable adapters for LC, SC, FC, and integrated red light sources for 1.25 mm ferrules
  • Guided user experience for fiber testing.
  • Barcode scanner function for quick assignment of the cable ID
  • Camera for documentation & QR code scanning
  • Modular platform that can be expanded when needed
  • Economical device for all common fiber Tier 1 measurements
  • Expandable with copper certification modules up to CAT8 and beyond.
  • Easy handling due ergonomic housing and light weight
  • Sensitive touch screen
  • Dual Control System PLUS TM for fast workflow

Product details

Delivery

Scope of delivery:

  • 2 x Mainframe units
  • 2 x Quad multimode and singlemode modules with SC and LC PC adaptors
  • 2 x Headsets
  • 1 Set Calibration and conformity certificates
  • 1 Tri-Mode softcase
  • 2 x Charging adapters
  • 1 x Quick Start Guide

Note: Please order test reference cords separately

Specifications
Accuracies:IEC 14763-3, IEC 61280-4-1, IEC 61280-4-2
Standard: ISO 11801, EN50173, TIA 568.3, JIS C5150, GB 50312
Input and output connectors: SC/PC, LC/PC, optional FC/PC, ST/PC
LIGHT SOURCES
Light Source: LED: 850 ±20 nm EF compliant, 1300 ±20 nm Fabry-Perot: 1310 ±20 nm 1550 ±20 nm
Output TX power (nominal) at 23°C: MM: ≥-24 dBm, SM: ≥+4 dBm
Output TX power stability: MM: ±0.05 dB over 8 hours, ±0.03 dB over 15 minutes SM: ±0.1 dB over 8 hours, ±0.08 dB over 15 minutes
POWER METER
Power Meter: 800 - 1650 nm, calibrated on 850, 1300, 1310, 1550 nm
Power Measurement Range: 850 nm: 5dB m to -65 dBm, Others: 5 dBm to -70 dBm
Power Measurement Uncertainty: ‹ ±5 % ±32 pW over 8 hours
Measurement Linearity: ‹ ±0.1 dB over 8 hours
Max Length: MM: 12 km, SM: 130 km
Length measurement accuracy: ±1.5 m plus ±1 % of link length
Units: dB, dBm, mW

Full specifications see datasheet

Documents
Datasheet (PDF, 1 MB) Manual (PDF, 38 MB) Brochure (PDF, 4 MB)