CableMaster 500- Cable tester and fault locator

Article Number: 226512

Affordable Cable Tester and Fault Locator

The CableMaster 500 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems. It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The CableMaster 500 has a large, bright backlit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing.

Cable Verification

• Tests voice (6 wire), data (8 wire) and video (coax)
• Easy to read, extra large 7-segment LCD screen with large icons
• Tone generation over voice, data and video cables, with 4 different tones
• Measures length of entire cable and individual wire pairs
• RJ (Voice & Data) master remote stores in bottom of case
• Maps 19 locations at one time
• Tests and indicates pins with shorts, opens, reversals, miswires and split pairs
• Displays “Pass” icon for correctly wired T568A/B and crossover/uplink
• Displays “Pass” icon for correctly wired 6-pin telephone plus “Rev” for reversepinned
• Low power consumption for long battery life
• Auto power-off

Conveniences

• Built-in LED Flashlight
• Easy-to-read Large Backlit LCD Display
• Glow-in-the-Dark Buttons
• Audible Beep for Additional Feedback
• Ergonomic Slip-resistant Side Grips
• Self-stored Master Remote - Squeeze remote at finger grip openings in main unit to remove
• RJ45, RJ12 and F-Jack on Main Unit and Remote

Product Enquiry