WireXpert 500 Industrial

Perfectly equipped for measurements in the industrial environment

Article Number : 228335

Extended copper cable certification up to 500 MHz, Class D/E/EA & Cat 5e/6/6A
Meets and exceeds TIA and ISO Level IIIe accuracy requirements, ETL verified
Includes all accessories for measurements on industrial M12D, M12 X and RJ45 routes
Measures the cabling structures required for industrial applications, e.g.: end-to-end cabling, MPTL

WireXpert 500 – Industrial

The WireXpert 500 measurement solution for Industrial Ethernet cabling is suitable for measurementson LAN cabling with Industrial Ethernet connection technology. The Industrial Kit contains M12 D-coded and M12 X-coded interfaces, as well as RJ45 interfaces, which allow 10 Gigabit-capable Industrial Ethernet cabling to be measured efficiently.

Especially for applications in industrial data cabling, the kit includes, in addition to the WireXpert 500, adaptations for a variety of LAN cabling with Industrial Ethernet connection technology.

Advantages

Areas of application	Acceptance test of industrial copper installations up to 10Gb/s External cabling on buildings Special mechanical engineering with special connecting hardware
Special characteristics	Complete kit for measurements in industrial environments with RJ45 and M12 connecting hardware Upgradeable for copper measurements up to Cat 8 and ISO class I and II Upgradeable for fiber optic measurements
Your benefit	Flexible architecture enables testing of M12 channels, permanent links and end-to-end links, including hybrid links (M12-RJ45) Easy selection of test limits, including PROFINET limits Supports user-defined test limits for specific applications Most affordable certifier for premise cabling and Industrial Ethernet

Product details

WireXpert 500 Industrial

1 WireXpert 500 Local - with cover, without measuring adapter
1 WireXpert 500 Remote- with cover, without measuring adapter
2 power supplies
2 power cables
2 headphones
1 Envelope with calibration certificate, USB stick, quick start guide
2 Industrial adapters
2 TERA to preLink^®measuring cables
1 TERA-TERA cable 2 m
2 preLink^®M12 D socket
2 preLink^®M12 X socket
2 preLink^®M12 D plug
2 preLink^®M12 X connector
2 preLink^®RJ45 socket
2 preLink^®RJ45 plug
1 Hard case
2 plastic sorting boxes for preLink^®plugs and sockets

Parameters	Specification
COPPER TESTING
Certification testing	TIA 568-D.2 Cat 5e, 6, 6A, Cat 8, 1005A, MPTL ISO/IEC 11801 series, EN 50173 Class D, E, EA, Class I and II Permanent Link and Channel, Cat 5e, 6, 6A patch cable
Max cable length for dual-ended Autotest	500m
Insertion cycles	Channel: 10 000 typical, Permanent link: 5000 typical
TEST PARAMETERS	As specified in TIA 1152A, IEC 61935
Wiremap	TIA 568A and 568B, crossover variants
Loop Resistance	0 to 40Ω, ±0.1Ω
Length	0 to 500m, ±0.5m (dual-ended testing)
Propagation Delay and Delay Skew	0 to 5000ns, ±1ns
Attenuation	0 to 70dB, ±0.1dB
Pair-to-Pair and Power-Sum NEXT	0 to 85dB, ±0.2dB
Pair-to-Pair and Power-Sum ACRF	0 to 85dB, ±0.2dB
Return Loss	0 to 40dB, ±0.2dB
ACRN, PSACRN	0 to 85 dB, ±0.5dB
Advanced diagnostics	Time-domain fault Locator for RL and NEXT
Measurement accuracy	Exceeds TIA 1152A Level IIIe, 2G and IEC 61935-1 Level IIIe, IV, V, VI
Measurement frequency range	1 - 500MHz
GENERAL SPECIFICATIONS
Interfaces	Probe Interface, RJ45 Ethernet, USB host and device, talkset, power jack
Display	5" industrial LCD, touch sensitive area on both units
Enclosure	Ruggedized plastic with rubber over-mold, withstands 1.5m drop test on hard surface
Remote unit abilities	View test results, save tests, start autotest
Power supply	AC 100-240V to 12V, 3A power adapter
Input over-voltage protection	Protected against Telco voltages
Battery	Removable and rechargeable Li-Ion
Battery capacity	>8 hours continuous operation
Internal storage capacity	2000 copper test results with full plot information
External storage	USB Flash Drive
Dimensions	232 x 126 x 87mm (8.7 x 4.3 x 2.1 inch)
Weight	Approx. 1.4kg (3lb)/unit
Supported languages	tw, cs, en, fi, fr, de, it, ja, ko, pl, pt, ru, es, sv, tr
Calibration period	1 year
ENVIRONMENTAL
Operating temperature	0 to 40°C
Storage temperature	-20 to 60°C
Relative humidity	10% to 80%
MINIMUM SYSTEM REQUIREMENTS FOR REPORTING SOFTWARE
Microsoft Windows 8/10, 32 or 64 bits	Intel Core i3, 2.4GHz and higher
200MB of free disk space	1GB RAM
Microsoft.NET Framework 4.0