LinkXpert SQ - The smart qualifier for copper, fiber optic, and Wi-Fi
Article number: 226117
- Ethernet speed test for copper links up to 10 Gbit/s
- Ethernet speed test for fiber optic links up to 100 Gbit/s
- Qualification, commissioning, and troubleshooting in mixed network environments
- Customizable AUTOTEST with site and network profiles
- PASS/FAIL evaluations with an instantly available PDF report
Qualify, verify, and troubleshooting - all with a single device
The LinkXpert SQ is a smart network qualifier for copper and fiber optic links that also integrates Wi-Fi diagnostics. It expands the verification and troubleshooting capabilities of the LinkXpert series to include qualification options for higher Ethernet data rates.
10G copper qualification for Ethernet links
- Ethernet speed test ranging from 10 Mbit/s through 100 Mbit/s, 1 Gbit/s, 2.5 Gbit/s, and 5 Gbit/s up to 10 Gbit/s
- Qualification in just a few seconds
- Integrated numerical TDR for troubleshooting copper cables
Fiber qualification up to 100 Gbit/s
- For fiber optics, the LinkXpert SQ supports the evaluation of links for Ethernet applications at 1, 10, 40, and 100 Gbit/s
- Measures attenuation and length values in accordance with IEEE 802.3
Auto mode is available for both copper and fiber optics. Additionally, AUTOTESTs can be predefined with site and network profiles, allowing recurring tests to be performed in a standardized and reproducible manner. Each AUTOTEST receives a unique PASS/FAIL evaluation; the corresponding PDF report is immediately available for download.
Comprehensive Ethernet and PoE++ diagnostic functions, PoE++ tests up to 90 W, and Wi-Fi diagnostics make the LinkXpert SQ a versatile tool for commissioning, service, and troubleshooting.
Advantages
Areas of application
- Ethernet speed test for copper links from 10 Mbit/s to 10 Gbit/s
- Ethernet speed test for fiber optic links from 1 to 100 Gbit/s
- Commissioning and documentation of structured copper and fiber optic networks, as well as troubleshooting
Special features
- 10-Gigabit chip technology for copper qualification
- Quick-test setup with preset auto mode for copper, fiber, and Wi-Fi in the test setup
- Preconfigurable AUTOTESTs with site and network profiles
- Automatic PASS/FAIL evaluation with instant PDF report download
- Includes the proven LinkXpert M3 features (Wi-Fi, PoE++, TDR, wiremap, optional fiber connector microscopy)
Your benefits
- Better assess network infrastructure and determine the appropriate Ethernet data rate
- Standardize test procedures and ensure consistency across projects and teams
- Quick documentation thanks to automatic PASS/FAIL evaluation and PDF reports
- Qualification, verification, and troubleshooting in a single device
Product Details
- LinkXpert SQ device with integrated Li-Ion battery
- Smart Remote #1 Art. Nr. 226292-1
- Power supply
- Carrying case
- 2 RJ45 cables
- Red light source adapter 2.5 / 1.25 mm
- USB WiFi adapter
- Card with QR code to Quick Start Guide
| Product type | Network qualifier / Ethernet network tester |
| Media | Copper, Fiber, Wi-Fi |
| Copper qualification | 10 Mbit/s / 100 Mbit/s / 1 Gbit/s / 2,5 Gbit/s / 5 Gbit/s / 10 Gbit/s; optional 2 pair 100 Mbit/s testing option |
| Fiber qualification | 1 / 10 / 40 / 100 Gbit/s; SM or MM |
| Copper speed selection | Manual or auto |
| Copper cable evaluation | NEXT, Delay, Return Loss |
| Fiber speed selection | Manual or auto |
| Fiber optic evaluation | Based on attenuation and length values using appropriate SFPs in accordance with IEEE 802.3 |
| AUTOTEST | Pre-definable with site and network profiles, automated PASS/FAIL evaluation, PDF report with instant download |
| Wi-Fi | Features equivalent to LinkXpert M3, IEEE 802.11ac via USB adapter, access point scanner, SSID/BSSID/channel/encryption |
| Network diagnostics | DHCP, DNS, Ping, Traceroute, LLDP/CDP, VLAN features equivalent to LinkXpert M3 |
| PoE++ | Load test up to class 8, 90 W |
| Copper baseline assessment | Wiremap-568A/B, COAX, TDR with fault detection, length measurement per pair, split pair detection, internal tone generation |
| Fiber optic (VFL) | Red light source (safety rated class 2 laser), compatible with Softing fiber microscope |
| Screen | 5 ¼" TFT touch screen |
| Dimensions | 160 × 93 × 33 mm |
| Weight | 400 g (incl. internal battery) |
| Rechargeable battery | 7.2 V Li-Ion 3.12 Ah, internal, changeable |
| Battery life | up to 8 hrs for Wiremap test |
| Power supply (device) | 12 V DC, 2.5 A, round connector, center plus |
| External power supply | AC 100–240 V / DC 12 V, 3 A, EURO, UK and US connector |
| Voltage protection | 60 V DC / 55 V AC |
| Operating temperature | −10 to 50 °C |
| Storage temperature | −20 to 60 °C |
| Humidity | 10 % to 80 %, non-condensing |
