WireXpert MP FQ - Fiber Certification Tester for Single-Mode and Multimode Networks
Article number: 230500
Certifier for singlemode and multimode fiber cables
- WireXpert MP mainframe with quad modules supporting: multimode (850/1300 nm) and singlemode (1310/1550 nm)
- Broadband power meter from 800 to 1650 nm
- EF-compliant multimode measurement for high accuracy
- Interchangeable adapters for LC, SC, FC connectors
- Integrated red light sources for fiber inspection
- Guided workflow for fiber testing
Tier 1 Fiber Certification for Multimode and Singlemode Networks
The WireXpert MP FQ fiber certification tester is an all-in-one Tier 1 solution for multimode and singlemode fiber testing, combining both technologies in a single platform.
The system supports:
• Multimode fiber (850/1300 nm)
• Single-mode fiber (1310/1550 nm)
This makes it ideal for environments requiring flexible and comprehensive fiber certification.
The WireXpert MP platform includes productivity-enhancing features such as:
• Integrated project management
• Onboard PDF reporting
• Barcode scanning with the LinkTrack™ mechanism and built-in DocuCam™
• Optional label printing
When measurement issues occur, the system converts complex RF data into clear test results, enabling efficient troubleshooting.
The ergonomically designed devices feature dual AUTOTEST buttons and the advanced Dual Control System DCS+™, ensuring intuitive operation and fast workflows. FlipTags™ allow flexible configuration as local or remote units.
An optional video microscope supports connector inspection, while the broadband power meter enables accurate power measurement for FTTx applications.
The WireXpert MP FQ can be expanded with:
• Copper certification modules up to Cat 8 and beyond
Advantages
- Testing of office cabling
- Testing of industrial cabling
- Testing of data center cabling
- Testing of specialized cabling, e.g., for trains, ships, and wind turbines
- Patch cord testing
- Testing of cable harnesses
- Quad modules supporting both multimode and single-mode fiber
- Broadband power meter (800–1650 nm)
- EF-compliant multimode measurement (IEC 14763-3)
- Interchangeable adapters (LC, SC, FC)
- Integrated red light sources
- Guided fiber testing workflow
- Cost-effective Tier 1 certification for multimode and single-mode fiber
- High measurement accuracy with EF compliance
- Flexible connectivity and adapter options
- Faster workflows with integrated tools
- Expandable platform for future network requirements
Product Details
- 2 Mainframe units
- 2 Quad fiber test modules (multimode and singlemode)
- 2 SC interchangeable adapters for RX (In)
- 2 LC interchangeable adapters for RX (In)
- 4 SC interchangeable adapters for TX (Out)
- 4 LC interchangeable adapters for TX (Out)
- 2 Chargers
- 2 Headsets
- Quick reference guide
- Calibration and compliance certificates
- Tri-mode soft case
Note: Cable sets and accessories excluded. Test reference cables must be ordered separately.
| Accuracies: | IEC 14763-3, IEC 61280-4-1, IEC 61280-4-2 |
| Standard: | ISO 11801, EN50173, TIA 568.3, JIS C5150, GB 50312 |
| Input and output connectors: | SC/PC, LC/PC, optional FC/PC, ST/PC |
LIGHT SOURCES | |
| Light Source: | LED: 850 ±20 nm EF compliant, 1300 ±20 nm Fabry-Perot: 1310 ±20 nm 1550 ±20 nm |
| Output TX power (nominal) at 23°C: | MM: ≥-24 dBm, SM: ≥+4 dBm |
| Output TX power stability: | MM: ±0.05 dB over 8 hours, ±0.03 dB over 15 minutes SM: ±0.1 dB over 8 hours, ±0.08 dB over 15 minutes |
POWER METER | |
| Power Meter: | 800 - 1650 nm, calibrated on 850, 1300, 1310, 1550 nm |
| Power Measurement Range: | 850 nm: 5dB m to -65 dBm, Others: 5 dBm to -70 dBm |
| Power Measurement Uncertainty: | ‹ ±5 % ±32 pW over 8 hours |
| Measurement Linearity: | ‹ ±0.1 dB over 8 hours |
| Max Length: | MM: 12 km, SM: 130 km |
| Length measurement accuracy: | ±1.5 m plus ±1 % of link length |
| Units: | dB, dBm, mW |
For complete specifications, see data sheet.
Sync your measurement data with your preferred cloud service using the ITN Sync app
With ITN Sync, you can easily and securely transfer measurement data from your Softing IT Networks testers directly to your preferred cloud—without the need for additional accounts or registration. The data belongs to you and remains under your control. Share test results flexibly via OneDrive, Dropbox, Google Drive, iCloud, Nextcloud, or other cloud storage services, or send them via email - it’s as easy as sharing a photo.
