| CW Source | |
|---|---|
| CW Source output power level | −3.5 dBm |
| Operating modes | CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz, TWINTest |
FiberXpert OTDR 5000 - Fiber Optic Tester for Tier 2 Certification and Fault Analysis
Article number: 226534
OTDR tester for single-mode and multimode fiber networks
- Standard-compliant Tier 2 fiber optic measurement (OTDR testing)
- Tabular listing of all fiber link events with evaluation
- Graphical OTDR trace for distance-based analysis of reflection and attenuation
- Automatic PASS/FAIL analysis according to TIA/IEC standards
- Automatic macrobend detection
- Integrated attenuation meter
Precise and Uncomplicated Fiber Optic Certification
Simplified fiber certification and troubleshooting with OTDR technology
Fiber optic cables are essential in modern industrial and enterprise networks, even over short distances, to support increasing bandwidth demands.
However, installation requires precision, as contaminated fiber end faces are responsible for up to 96% of network failures.
A user-friendly OTDR tester, such as the FiberXpert OTDR 5000, is therefore critical. It supports:
• Fiber inspection via USB-connected microscope
• Smart Link Mapper (SLM) for simplified visualization
Smart Link Mapper (SLM)
The Smart Link Mapper (SLM) converts complex OTDR measurements into clear, easy-to-read diagrams.
It provides direct PASS/FAIL interpretation of:
• Connectors
• Splices
• Reflection points
This significantly simplifies the analysis of OTDR traces and improves troubleshooting efficiency.
The FiberXpert OTDR 5000
The compact FiberXpert OTDR 5000 supports:
• Multimode fiber (850/1300 nm)
• Single-mode fiber (1310/1550 nm)
Key capabilities include:
• High dynamic range
• Event detection zone < 80 cm (ideal for short fiber links)
• Precise attenuation and power measurements
• Automatic standards-based evaluation
It enables professional Tier 2 fiber certification and reporting, while remaining easy to use in field environments.
The optional fiber microscope supports inspection according to IEC 61300-3-35.
Protection for Launch Fibers
Optional launch cords provide:
• Protection for measurement fibers
• Easy handling during testing
The PRO version includes an automatic roll-up function for improved workflow efficiency.
Advantages
Areas of application
- Fiber optic certification and Tier 2 testing
- Fault diagnosis in single-mode and multimode fiber links
- Maintenance of fiber optic infrastructure
- Network testing in industrial and field environments
- Detailed analysis and documentation of fiber links
Special features
- Supports multimode and single-mode wavelengths
- Optimized for short fiber link testing (< 80 cm event zone)
- Smart Link Mapper visualization
- Automatic PASS/FAIL analysis
- Accurate attenuation and power measurement
- Storage of up to 10,000 measurements
Your benefit
- Faster troubleshooting with intuitive OTDR visualization
- Reduced downtime through accurate fault detection
- Reliable certification results for network acceptance
- Rugged design for field use
- Lower maintenance costs with replaceable connectors
Product Details
- FiberXpert OTDR 5000 device
- Shoulder bag
- Power supply
- Transport case
- Quick start guide
- Documentation (digital)
General (Typical at 25°C)
| Weight | 1.26kg (2.8lb) |
| Dimensions (w × h × d) | 128 x 134 x 40mm (5 x 5.28 x 1.58in) |
Optical Interfaces | |
|---|---|
| Interchangeable optical connectors | FC, SC, DIN, LC and ST |
Technical Characteristics | |
|---|---|
| Laser safety class (21 CFR) | Class 1 |
| Distance units | Kilometers, feet, and miles |
| Group index range | 1.300000 to 1.700000 in 0.00001 steps |
| Number of data points | Up to 128,000 data points |
| Distance measurement | Automatic or dual cursor |
| Display range | 3.25 m to 260 km |
| Cursor resolution | 1 cm |
| Sampling resolution | 4 cm |
| Accuracy | ± 1m ± 10-5 x distance ± sampling resolution (Excluding group index uncertainties) |
| Attenuation Measurement | |
|---|---|
| Automatic, manual, 2-point, 5-point, and LSA | |
| Display range | 1.25 dB to 55 dB |
| Display resolution | 0.001 dB |
| Cursor resolution | 0.001 dB |
| Linearity | ±0.03 dB/dB |
| Threshold | 0.01 to 5.99dB in 0.01dB steps |
| Reflectance/ORL Measurements | |
|---|---|
| Reflectance accuracy | ±2 dB |
| Display resolution | 0.01 dB |
| Threshold | −11 to −99dB in 1dB steps |
| Power Meter | |
|---|---|
| Power level range | MM: -3 to -30 dBm SM: -2 to -50 dBm |
| Calibrated wavelengths | MM: 850 and 1300 nm SM: 1310, 1490, 1550, 1625, and 1650 nm |
| Measurement accuracy | MM: ±1 dB (at -15 dBm) SM: ±0.5 dB (at -30 dBm) (using a mode conditioner |
| Multimode and Quad OTDR Modules (Typical at 25°C) | |
|---|---|
| Central wavelength (Laser at 25°C) | 850/1300 ±30 nm 1310/1550 ±20 nm |
| Pulse width | 3 ns to 1 μs 3 ns to 20 μs |
| RMS dynamic range | 26/24 dB 37/35 dB (The one-way difference between the extrapolated backscattering level at the start of the fiber and the RMS noise level after 3-minutes averaging) |
| Event dead zone | 0.8 m 0.9 m (Measured at ±1.5dB down from the peak of an unsaturated reflective event) |
| Attenuation dead zone | 4 m 4 m (Measured at ±0.5dB from the linear regression using an F/UPC-type reflectance) |
