WireXpert MP C6A - Cable Certification Tester for Copper and SPE Networks
Article number: 230001
Modular entry level copper certification
- WireXpert mainframe with 600 MHz copper test module
- With a frequency range from 100 kHz to 600 MHz, the C6A is not only a Cat 6A and Cat 7 tester, but also supports Single Pair cabling
- Fast InstantWiremap™ for locating wiremap problems even before the user has started an AUTOTEST
- Comes with replacable and cost-effective LongLife™ measuring cables
- For industrial uses, a wide range of connectors and measurement cables are available
Modular Entry-Level Cable Certification for Copper Networks
The WireXpert MP C6A cable certification tester is a fully equipped entry-level solution for copper cable certification, supporting frequencies from 100 kHz to 600 MHz.
It is suitable for:
• Cat 6A and Cat 7 testing
• Single Pair Ethernet (SPE) cabling
The system includes advanced test capabilities such as:
• DCRU and TCL measurements
• MPTL and EzE test modes
It can be upgraded via software to support up to 3000 MHz (Cat 8).
Efficient Testing with Modular Flexibility
The WireXpert MP platform includes features designed to improve workflow efficiency:
• Integrated project management
• Onboard PDF reporting
• Barcode scanning for easy link tracking with LinkTrack™
• Documentation with integrated DocuCam™
The Dual Control System Plus DCS+™ ensures ergonomic operation with dual autotest buttons for left- and right-handed users.
Advantages
- Testing of office cabling
- Testing of industrial cabling
- Testing of data center cabling
- Testing of specialized cabling, e.g., for trains, ships, and wind turbines
- Patch cord testing
- Testing of cable harnesses
- Measurement capability up to 600 MHz
- Landscape display orientation
- Long battery life
- InstantWiremap™
- Replaceable LongLife™ test cables
- Modular upgrade capability
- Fast cable identification via barcode scanning with LinkTrack™
- Secure documentation with integrated DocuCam™ camera
- Flexible modular expansion
- Cost-effective solution for copper certification including SPE
- DCS+™ for best in class ergonomics
Product details
- 2 Mainframe units
- 2 C6A copper test modules
- 2 Cat 6A channel test adapters
- 2 Cat 6A permanent link adapters
- 2 LongLife™ permanent link cables
- 2 Chargers
- 2 Headsets
- 1 Quick reference guide
- Calibration and compliance certificates
- DCRU calibration artifact
- Tri-mode soft case
COPPER TESTING
| Accuracies: | Exceeds: IEC 61935-1 Level IIIe, IV; IEC 61935-1-1; IEC 61935-1-2; TIA 1152A Level IIIe; TIA-5071; draft ISO/IEC 61935-4 |
| Certification testing: | TIA 568.2-E CAT 5e, 6, 6A, TIA 1005A, TIA 568.5, TIA 568.7; ISO/IEC 11801 series and EN 50173 Class D, E, EA, F; TIA and ISO testing modes: Permanent link, channel, MPTL, E2E; Patchcord testing Cat 5e, 6, 6A, 7 |
| Max. cable length for dual-ended Autotest: | Measurement range: 0 - 2000 m, display resolution: 0.1 m |
| Insertion cycles: | Channel: 10000 typical, Permanent link: 5000 typical |
TEST PARAMETERS
| Wiremap: | TIA 568A and 568B, crossover variants, Profinet |
| Loop Resistance: | Measurement range: 0 - 200 Ohm, display resolution: 0.1 Ohm |
| Length: | Measurement range: 0 - 2000 m, display resolution: 0.1 m |
| Propagation Delay and Delay Skew: | Measurement range 1 ns – 10 μsec, display resolution: 1 ns |
| RF Parameter Display Resolution: | 0.1 dB |
| Advanced diagnostics: | Time-domain fault Locator for RL and NEXT |
For complete specifications, see data sheet.
Sync your measurement data with your preferred cloud service using the ITN Sync app
With ITN Sync, you can easily and securely transfer measurement data from your Softing IT Networks testers directly to your preferred cloud—without the need for additional accounts or registration. The data belongs to you and remains under your control. Share test results flexibly via OneDrive, Dropbox, Google Drive, iCloud, Nextcloud, or other cloud storage services, or send them via email - it’s as easy as sharing a photo.
