Fiber Microscope

Digital fiber microscope for connector end-face inspection

Article Number : 226539

Inspection and evaluation of the fiber optic surfaces with PASS/FAIL analysis
Automatic evaluation according to IEC 61300-3-35
Easy handling and fast analysis
Compatible with LinkXpert M3, NetXpert series, WireXpert series, or FiberXpert OTDR 5000
Adapters for the most common fiber optic connectors included with delivery

在测试光纤链路和每次光纤连接器配合之前，应检查和评估连接器端面，以避免可能导致网络性能下降和接触区破坏性损坏的污染。新的光纤显微镜提供了快速和容易的连接器端面检查和符合IEC 61300-3-35的自动分析。

显微镜可以通过 USB 与 WireXper t或 FiberXpert OTDR 5000 轻松连接，并且连接器端面的评估可以添加到测试报告中。

Areas of application	Inspects and certifies the end-faces of fiber optic connectors
Special characteristics	Inspection and evaluation of the fiber optic surfaces with PASS/FAIL analysis Automatic evaluation according to IEC 61300-3-35 Compatible with LinkXpert M3, NetXpert series, WireXpert series, or FiberXpert OTDR 5000 Adapters for the most common fiber optic connectors included with delivery
Your benefit	Easy handling and fast analysis Improves fault detection as contaminated connectors are the main cause of faults in optical networks Prevention of subjective misjudgments of fiber end-face quality

Delivery

*Additional tips are available as accessoires

Specifications

Weight: 110 g (3.88 oz)

Dimensions (W × H × D): 140 x 46 x 44 mm (5.5 x 1.8 x 1.7 in)

Low-mag field of view (FOV): Horizontal: 740 μm, vertical: 550 μm

High-mag field of view (FOC): Horizontal: 370 μm, vertical: 275 μm

Live image: 640 x 480 pixels at 8 fps

Connector: USB 2.0 (backwards compatible with USB 1.1)

Cord length: 183 cm (6 ft)

Camera sensor: 1/2.5-in CMOS, 2560 × 1920 pixels

Particle size detection:< 1 μm

Light source: Blue LED, 100,000+ hour life

Lighting technique: Coaxial

Power source: USB Port

Certification: CE

Operating temperature: 0 to 40 °C (32 to 104 °F)

Storage temperature: 20 to 60 °C (-4 to 140 °F)

Documents

Data Sheet (PDF, 831 KB)