Fiber Microscope

Digital fiber microscope for connector end-face inspection

Article Number : 226539

Inspection and evaluation of the fiber optic surfaces with PASS/FAIL analysis
Automatic evaluation according to IEC 61300-3-35
Easy handling and fast analysis
Compatible with LinkXpert M3, NetXpert series, WireXpert series, or FiberXpert OTDR 5000
Adapters for the most common fiber optic connectors included with delivery

Fiber microscope

Digital fiber microscope to inspect connector end-faces

Before testing fiber-optic links and every time fiber optic connectors are mated, connector end-faces should be inspected and evaluated to avoid contamination that can cause degradation of network performance and destructive damage in the contact zone. The new fiber microscope provides for a quick and easy inspection of connector end-faces and an automated analysis compliant with IEC 61300-3-35.

The microscope is easily connected via USB with WireXpert or FiberXpert OTDR 5000 and the evaluation of connector end-faces can be added to the test reports.

Advantages

Areas of application	Inspects and certifies the end-faces of fiber optic connectors
Special characteristics	Inspection and evaluation of the fiber optic surfaces with PASS/FAIL analysis Automatic evaluation according to IEC 61300-3-35 Compatible with LinkXpert M3, NetXpert series, WireXpert series, or FiberXpert OTDR 5000 Adapters for the most common fiber optic connectors included with delivery
Your benefit	Easy handling and fast analysis Improves fault detection as contaminated connectors are the main cause of faults in optical networks Prevention of subjective misjudgments of fiber end-face quality