Cable Probe - Locate quickly cable termination ports

Article number: CP15

Designed Specifically for Network Maintenance Professionals

The Cable Tracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The Cable Tracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing.

  • Activate link lights to identify a connected hub or switch port
  • Transmits four audible tones
  • RJ-45 male or female connection
  • Detachable DMM alligator clips
  • Detects short or open circuits
  • Cable Tracker Network ID Kit

 

  • Quickly locate cable termination points/ports or  identify individual wires/pairs with an audible tone
  • The built-in low battery indicator helps you avoid Cable Tracker downtime.

Probe (CP15)

Dimensions

8.0 in x 1.4 in. x 1.5 in.
203 mm x 36 mm x 38 mm

Power Supply

One 9 volt battery each for CT10 and CT15

Environment

Operating Temperature

32 °F to 122 °F / 0 °C to 50 °C

Storage Temperature

14 °F to 131 °F / -10 °C to 55 °C

CP15 Reception Frequencies

Broadband

100 - 20000 Hz  

 

 

  • Probe CP15
  • Manual

Check if the transmitter sends a signal. If you are using a shielded cable it is physically impossible to trace the cable run at the shielded parts. In this case, the tone can only be received at the connector at the end of the cable.

Although this is theoretically possible, the attenuation caused by floors/walls is mostly too high to receive an audible signal. If you are using a shielded cable it is physically impossible to trace the cable run at the shielded parts. In this case, the tone can only be received at the connector at the end of the cable.

It is operated with a 9V block battery.

Contact us now!

I'm interested in ...

*mandatory fields

Your request will be forwarded internally. The appropriate contact person will get in touch with you. Here you can find more information about our privacy policy.

How to reach us:

Phone: +65 6569 6019

Fax: +65 6899 1016
E-Mail: asia-sales.itnetworks@softing.com

Softing Singapore Pte. Ltd
73 Science Park Drive,
#02-12/13, Cintech I
Singapore Science Park 1,
Singapore 118254