Understanding the basics of copper cabling testing (01 ~ 04)

Introduction to WireXpert standard kit
Verification, Qualification, Certification
Shielded or Unshielded
Cable Categories

Understanding the basics of copper cabling testing (05 ~ 07)

Standards, Categories and Classes
The different types of Links
Setting Reference

Performing certification on different type of links with WireXpert

Permanent Link
Channel link
End-to-End link
Modular Plug Test Link (MPTL)

Understanding the basics of Fiber optic testing (01 ~ 04)

Different types of procedures and tests
Single mode and Multi Mode
Fiber optic cables
Fiber optic connectors

Understanding the basics of Fiber optic testing (05 ~ 08)

MPO
Encircled Flux, Mandrel and light sources
Standards and Loss Budget
Referencing Methods

Certifying Multi Mode Fiber with WireXpert (01 ~ 04)

Introduction to WireXpert MMEF test kit and cord kits
Setting Reference (i) – Dual ended 1 jumper method
Setting Reference (ii) – Dual ended 2 jumpers method
Setting Reference (iii) – Dual ended 3 jumpers method

Certifying Multi Mode Fiber with WireXpert (05 ~ 08)

Setting Reference (iv) - Single ended 1 jumper method with WireXpert and MMEF test kit
Setting Reference (v) - Single ended 2 jumpers method with WireXpert and MMEF test kit
Setting Reference (vi) - Single ended 2 jumpers method with WireXpert and MMEF test kit
Performing a Fiber Optic Certification Test (i) - Dual ended Multimode Fiber Test

Certifying Multi Mode Fiber with WireXpert (09)

Performing a Fiber Optic Certification Test (ii) - Single ended Multimode Fiber Test

Certifying Single Mode Fiber with WireXpert (01 ~ 04)

Introduction to WireXpert SM test kit and cord kits
Setting Reference (i) - Dual ended 1 jumper method with WireXpert and SM test kit
Setting Reference (ii) - Dual ended 2 jumpers method with WireXpert and SM test kit
Setting Reference (iii) - Dual ended 3 jumpers method with WireXpert and SM test kit

Certifying Single Mode Fiber with WireXpert (05 ~ 08)

Setting Reference (iv) - Single ended 1 jumper method with WireXpert and SM test kit
Setting Reference (v) - Single ended 2 jumpers method with WireXpert and SM test kit
Setting Reference (vi) - Single ended 3 jumpers method with WireXpert and SM test kit
Performing a Fiber Optic Certification Test (i) - Dual ended Single Mode Fiber Test

Certifying Single Mode Fiber with WireXpert (09)

Performing a Fiber Optic Certification Test (ii) - Single ended Single Mode Fiber Test

eXport PC software (01 ~ 04)

Introduction to eXport PC software
Understanding the interface of eXport PC software
Project and Data Management
Setting preferences

eXport PC software (05 ~ 07)

Special operations
Connecting to eXport Cloud
Connecting to eXport Cloud with WireXpert

NetXpert XG demo series (01 ~ 04)

What is cable qualification vs cable certification testing?
Quick look at NetXpert XG on a multi cable test project
Watch an Ethernet cable fail a test with bad connectors
Demonstration of a CAT6A cable passing a 10Gbps qualification test

NetXpert XG demo series (05 ~ 08)

How to setup your cables for POE testing with NetXpert XG
NetXpert XG active network testing
How to perform LLDP network discovery test using NetXpert XG active network teting
How to pull a report from NetXpert XG

NetXpert XG demo series (09 ~ 12)

How to change a report logo on the NetXpert XG
How to create a new project on the NetXpert XG
Demonostration of qualifying a fiber cable to 10Gbps
NetXpert XG fiber optic cable microscope inspection